Yamaha F6D Instrukcja Właściciela Pobierz pdf (Strona 48)

Operation

● Run the boat at the lowest possible

speed when using the shallow water

cruising system. The tilt lock mecha-

nism does not work while the shallow

water cruising system is being used. Hit-

ting an underwater obstacle could

cause the outboard motor to lift out of

the water, resulting in loss of control.

● Do not rotate the outboard motor 180°

and operate the boat in reverse. Place

the gear shift in reverse to operate the

boat in reverse.

● Use extra care when operating in re-

verse. Too much reverse thrust can

cause the outboard motor to lift out of

the water, increasing the chance of acci-

dent and personal injury.

● Return the outboard motor to its normal

position as soon as the boat is back in

deeper water.

CAUTION:

ECM00260

Do not tilt the outboard motor up so that

the cooling water inlet on the lower unit is

above the surface of the water when set-

ting up for and cruising in shallow water.

Otherwise severe damage from overheat-

ing can result.

EMU28123

Procedure

1. Place the gear shift lever in neutral.

2. Place the tilt lock lever in the release/up

position.

3. Slightly tilt the outboard motor up. The tilt

support bar will lock automatically, sup-

porting the outboard motor in a partially

raised position.

NOTE:

This outboard motor has 2 positions for shal-

low water cruising.

ZMU02047

U60R10E0.book Page 42 Monday, June 21, 2004 9:34 AM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 86 87

Komentarze do niniejszej Instrukcji

Brak uwag

Yamaha F6D Instrukcja Właściciela Strona 48

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Yamaha F6D