Yamaha 440 Instrukcja Właściciela Strona 62
- Strona / 96
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
62
Appendix
Message List
Appendix
Message List
To turn off the message, press the [-/NO] button.
Message Meaning
CLr Initializing the instrument to the default setting.
NOTICE
Do not turn off the power of the instrument when “CLr” appears in the display. Doing so may delete all Song data in the
instrument, including external Songs (page 29).
con Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When this message
appears, you cannot operate the instrument.
E01 Displayed when the character code (
page 60) is not appropriate for the file name of the Song which you are
selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other problems. This
Song cannot be selected.
Displayed when no USB storage devices can be found, or a problem has occurred in the USB storage device.
Disconnect and connect the device again, then execute the operation. If this message appears repeatedly even
when there aren't any other likely problems, the USB storage device may be damaged.
Displayed when the backup data cannot be loaded. There is no backup data which can be loaded, or the data may
be damaged.
E02 Indicates that the USB storage device or media is protected.
E03 Displayed when the memory of the USB storage device becomes full, or the number of files and folders exceeds the
system limit.
E04 Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a USB storage
device to which data has already been stored or deleted a number of times, first make sure that the device does not
contain important data, then format it (
page 44) and connect to the instrument again.
EEE A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
End Displayed when the current operation is completed.
Enp The memory of the instrument or the USB storage device is running out. We recommend that you remove any
unnecessary files (
pages 37, 43) to ensure sufficient memory capacity before start recording.
FCL Indicates that internal memory is being cleaned up. Panel settings, recorded Songs and external Songs which have
been stored to the USER MIDI drive are being cleared, because the power has been turned off before the Save,
Load or Convert operations were completed.
NOTICE
Do not turn off the power of the instrument when “FCL” appears in the display.
For Indicates that the instrument is going to call up the Format operation for the USB storage device.
FUL Since the memory of the instrument or the USB storage device is insufficient, the operation could not be completed.
If this message appears during recording, the performance data may not be recorded properly.
n y Confirms whether each operation is executed or not.
n
–
y
Reconfirms whether the overwriting, delete or format operation is executed or not.
Pro Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file after cancelling
the read-only setting.
StP Displayed when you canceled conversion to audio.
UnF Displayed when an unformatted USB storage device is connected. First make sure that the device does not contain
important data, then format it (
page 44).
Uoc Communication with the USB device has been shut down because of overcurrent to the USB device. Disconnect the
device from the [USB TO DEVICE] terminal, then turn on the power of the instrument again.
UU1 Communication with the USB device has failed. Remove the USB device and make the connection again. If the
message appears even when the USB device is connected properly, the device may be damaged.
UU2 This USB device is not supported on this instrument, or too many USB devices may have been connected. Refer to
“Connecting a USB storage device” (
page 47) for information on the USB device connection.
- OWNER’S MANUAL 1
- SPECIAL MESSAGE SECTION 2
- FCC INFORMATION (U.S.A.) 3
- PRECAUTIONS 4
- CAUTION 5
- Information 6
- Included Accessories 7
- About the Manuals 7
- Main Features 8
- Table of Contents 9
- Panel Controls 10
- CLP-470/440/430 11
- CLP-465GP 11
- CLP-S408/S406 11
- Key Cover 12
- Music Rest 13
- 3. Carefully lower the lid 14
- 2. Turn the power on 15
- 1. Connect the power cord 15
- Introduction 16
- Using headphones 17
- Switching the speakers on/off 17
- Using the pedals 18
- 1. Start the metronome 20
- 2. Stop the metronome 20
- Maintenance 21
- (Voices) 22
- Listening to the Piano Demos 23
- (sampling technologies) 23
- [REVERB]/[EFFECT] 24
- Transposition — [TRANSPOSE] 25
- 1. Call up the Dual mode 26
- 1. Call up the Split mode 27
- Advanced Functions 28
- Playing back Songs 29
- 2. Select a Song 30
- 3. Start playback 31
- 4. Stop playback 31
- Useful playback functions 32
- 2. Start playback 33
- 3. Stop playback 33
- 2. Stop playback 33
- Recording Your Performance 34
- 4. Call up the Record mode 35
- 5. Start recording 35
- 1. Select a User Song 38
- Save the changed settings 39
- Handling Song Files 40
- 1. Select a MIDI Song 41
- 2. Call up the File mode 41
- 5. Exit from the File mode 41
- 4. Copy the Song 42
- 4. Delete the Song file 43
- 1. Call up the File mode 44
- 3. Exit from the File mode 44
- Connections 45
- 5 AUX IN [L/L+R][R] jacks 46
- Precautions when using the 47
- [USB TO DEVICE] terminal 47
- Using USB Storage Devices 47
- Connecting to a computer 48
- Settings 51
- 1. Call up the Function mode 52
- 2. Select a function number 52
- 3. Set the parameter 52
- 4. Exit the Function mode 52
- Function parameters — details 53
- Dual Mode Functions 54
- Split Mode Functions 55
- MIDI Song Channel 56
- Volume Setting 57
- MIDI Functions 57
- Program Change ON/OFF 58
- Control Change ON/OFF 58
- Initial Setup Send 58
- Backup Functions 59
- Character Code 60
- Data Backup 60
- Detailed Settings 61
- Message List 62
- Troubleshooting 63
- Preset Voice List 64
- Key-Off Sampling: 65
- Sustain Sampling: 65
- String Resonance: 65
- Default Setting List 67
- Appendix 68
- Assembling the Clavinova 69
- CLP-470 Assembly 70
- 1. Attach C to D and E 71
- 2. Attach B 71
- 3. Mount A 71
- 4. Secure A 71
- 5. Connect the pedal cord 72
- 6. Connect the power cord 72
- 7. Set the adjuster 72
- CLP-440/430 Assembly 73
- 1. Attach C to D and E 74
- CLP-S408 Assembly 76
- 1. Attach D to E and F 77
- 2. Temporarily mount B 77
- 5. Connect the speaker cord 78
- 6. Connect the pedal cord 78
- 7. Attach C 78
- 8. Connect the power cord 79
- 9. Set the adjuster 79
- CLP-S406 Assembly 80
- 2. Mount B 81
- 3. Mount C 81
- 4. Mount A 81
- 5. Attach A 82
- 6. Connect the speaker cord 82
- 7. Connect the pedal cord 82
- 8. Mount G 82
- 9. Connect the power cord 83
- CLP-465GP Assembly 84
- 2. Install the pedal box 85
- 4. Connect the power cord 86
- 5. Set the adjuster 86
- Specifications 87
- BC-100 Bench 88
- HPE-160 Stereo Headphones 88
- Model No 91
- Serial No 91
- IMPORTANT SAFETY INSTRUCTIONS 92
Powiązane produkty i podręczniki dla Cyfrowe klawisze Yamaha 440
Cyfrowe klawisze Yamaha H01 Dokumentacja
(32 strony)
(32 strony)
(108 strony)
Cyfrowe klawisze Yamaha F11 Dokumentacja
(80 strony)
(80 strony)
Cyfrowe klawisze Yamaha CLP-130 Dokumentacja
(80 strony)
(80 strony)
Cyfrowe klawisze Yamaha BK-5B Instrukcja Użytkownika
(116 strony)
(116 strony)
Cyfrowe klawisze Yamaha CLP-115 Dokumentacja
(44 strony)
(44 strony)
(44 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.643 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji