Yamaha 440 Instrukcja Właściciela Strona 86
- Strona / 96
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
86
Appendix
Assembling the Clavinova
4. Connect the power cord.
4-1 For models that feature a voltage selector:
Set the voltage selector to an appropriate
voltage.
4-2 Insert the AC power cord plug into the power
connector.
5. Set the adjuster.
Rotate the adjuster until it comes in firm
contact with the floor surface
6. Attach the headphone hanger.
Use the included two screws (4 x 10 mm) to
attach the hanger as shown in the illustration.
Voltage Selector
Before connecting the AC power cord, check the setting of the
voltage selector which is provided in some areas. To set the
selector for 110V, 127V, 220V or 240V main voltages, use a
“minus” screwdriver to rotate the selector dial so that the
correct voltage for your region appears next to the pointer on
the panel. The voltage selector is set at 240V when the unit is
initially shipped.
After the proper voltage has been selected, connect the AC
power cord to the [AC INLET] and an AC wall outlet. A plug
adaptor may be also provided in some areas to match the pin
configuration of the AC wall outlets in your area.
WARNING
An improper voltage setting can cause serious damage to
the instrument or result in improper operation.
4-1
4-2
Right leg on the bottom of the main unit, when viewed
from front
- OWNER’S MANUAL 1
- SPECIAL MESSAGE SECTION 2
- FCC INFORMATION (U.S.A.) 3
- PRECAUTIONS 4
- CAUTION 5
- Information 6
- Included Accessories 7
- About the Manuals 7
- Main Features 8
- Table of Contents 9
- Panel Controls 10
- CLP-470/440/430 11
- CLP-465GP 11
- CLP-S408/S406 11
- Key Cover 12
- Music Rest 13
- 3. Carefully lower the lid 14
- 2. Turn the power on 15
- 1. Connect the power cord 15
- Introduction 16
- Using headphones 17
- Switching the speakers on/off 17
- Using the pedals 18
- 1. Start the metronome 20
- 2. Stop the metronome 20
- Maintenance 21
- (Voices) 22
- Listening to the Piano Demos 23
- (sampling technologies) 23
- [REVERB]/[EFFECT] 24
- Transposition — [TRANSPOSE] 25
- 1. Call up the Dual mode 26
- 1. Call up the Split mode 27
- Advanced Functions 28
- Playing back Songs 29
- 2. Select a Song 30
- 3. Start playback 31
- 4. Stop playback 31
- Useful playback functions 32
- 2. Start playback 33
- 3. Stop playback 33
- 2. Stop playback 33
- Recording Your Performance 34
- 4. Call up the Record mode 35
- 5. Start recording 35
- 1. Select a User Song 38
- Save the changed settings 39
- Handling Song Files 40
- 1. Select a MIDI Song 41
- 2. Call up the File mode 41
- 5. Exit from the File mode 41
- 4. Copy the Song 42
- 4. Delete the Song file 43
- 1. Call up the File mode 44
- 3. Exit from the File mode 44
- Connections 45
- 5 AUX IN [L/L+R][R] jacks 46
- Precautions when using the 47
- [USB TO DEVICE] terminal 47
- Using USB Storage Devices 47
- Connecting to a computer 48
- Settings 51
- 1. Call up the Function mode 52
- 2. Select a function number 52
- 3. Set the parameter 52
- 4. Exit the Function mode 52
- Function parameters — details 53
- Dual Mode Functions 54
- Split Mode Functions 55
- MIDI Song Channel 56
- Volume Setting 57
- MIDI Functions 57
- Program Change ON/OFF 58
- Control Change ON/OFF 58
- Initial Setup Send 58
- Backup Functions 59
- Character Code 60
- Data Backup 60
- Detailed Settings 61
- Message List 62
- Troubleshooting 63
- Preset Voice List 64
- Key-Off Sampling: 65
- Sustain Sampling: 65
- String Resonance: 65
- Default Setting List 67
- Appendix 68
- Assembling the Clavinova 69
- CLP-470 Assembly 70
- 1. Attach C to D and E 71
- 2. Attach B 71
- 3. Mount A 71
- 4. Secure A 71
- 5. Connect the pedal cord 72
- 6. Connect the power cord 72
- 7. Set the adjuster 72
- CLP-440/430 Assembly 73
- 1. Attach C to D and E 74
- CLP-S408 Assembly 76
- 1. Attach D to E and F 77
- 2. Temporarily mount B 77
- 5. Connect the speaker cord 78
- 6. Connect the pedal cord 78
- 7. Attach C 78
- 8. Connect the power cord 79
- 9. Set the adjuster 79
- CLP-S406 Assembly 80
- 2. Mount B 81
- 3. Mount C 81
- 4. Mount A 81
- 5. Attach A 82
- 6. Connect the speaker cord 82
- 7. Connect the pedal cord 82
- 8. Mount G 82
- 9. Connect the power cord 83
- CLP-465GP Assembly 84
- 2. Install the pedal box 85
- 4. Connect the power cord 86
- 5. Set the adjuster 86
- Specifications 87
- BC-100 Bench 88
- HPE-160 Stereo Headphones 88
- Model No 91
- Serial No 91
- IMPORTANT SAFETY INSTRUCTIONS 92
Powiązane produkty i podręczniki dla Cyfrowe klawisze Yamaha 440
Cyfrowe klawisze Yamaha H01 Dokumentacja
(32 strony)
(32 strony)
(108 strony)
Cyfrowe klawisze Yamaha F11 Dokumentacja
(80 strony)
(80 strony)
Cyfrowe klawisze Yamaha CLP-130 Dokumentacja
(80 strony)
(80 strony)
Cyfrowe klawisze Yamaha BK-5B Instrukcja Użytkownika
(116 strony)
(116 strony)
Cyfrowe klawisze Yamaha CLP-115 Dokumentacja
(44 strony)
(44 strony)
(44 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.147 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji